Bostech's EGR101351R Reman Exhaust Gas Recirculation - EGR Coolers are built using stainless steel tubing for the internal heat exchanger. Manufactured specifically for the extreme heat demands of the GM 6.6L Duramax exhaust system and backed by a 24-month unlimited mileage warranty against material and workmanship defects.
Features:
- Performance - Built to endure the most rigorous operating conditions.
- Fitment - Direct fit replacement
- Durability - Built with high-quality stainless-steel to withstand extreme cold to heat conditions
Application:
- Engine:
- General Motors 6.6L Duramax LMM
- Vehicle:
- Chevrolet
- 2007-2010 Silverado 2500 HD (Pickup)
- 2007-2010 Silverado 3500 HD (Pickup)
- GMC
- 2007-2010 Sierra 2500 HD (Pickup)
- 2007-2010 Sierra 3500 HD (Pickup)
- Chevrolet
- Note:
- Application Data for reference only, not all make, model, or years may be listed.
- Please use OEM interchange to ensure proper fitment.
Product Information:
- How it Works:
- Purpose:
- The EGR Cooler is designed to reduce exhaust gas temperature before the gases re-enter the intake, lowering combustion peak temperatures and NOx formation.
- Flow:
- Hot exhaust gases exit engine through the exhaust manifold.
- The hot gases pass through the EGR Cooler core (heat exchanger) which consist of stainless-steel tubing surrounded by engine coolant.
- The coolant displaces the heat from the exhaust gases
- Cooled exhaust gas then gets mixed with incoming air and pushed back into the intake manifold.
- Purpose:
- Installation Note:
- Always allow the engine to cool completely, failure to do so will subject installer to serious injuries.
- Some vehicle models may have (2) Exhaust Gas Temperature - EGT Sensors one on each end of the EGR cooler, if your vehicle does not have the EGT sensors it will be necessary to plug the sensor ports. These plugs are available separate or provided in the EGR cooler Gasket and Installation Kits.
- Location:
- The EGR101351R EGR Cooler is typically found on the right(passenger) side of the engine connected to the exhaust manifold pipe.
- Restrictions:
- The EGR101351R EGR Cooler is not CARB certified.
- Please verify state and local restriction before ordering.
- The EGR101351R EGR Cooler is not CARB certified.
- Terminology:
- EGR Cooler
- Exhaust Gas Recirculation Cooler
- EGR Heat Exchanger
- Note:
- Gaskets, Seals, and O-Rings may vary in color.
- Bostech / BT-Power is not an original product manufacturer. Any and all use of the Original Manufacturer brand is for product description purposes only.
In the Box:
- (1) EGR Cooler
Core Return:
- To receive core credit, you will need to return:
- Exhaust Gas Recirculation - EGR Cooler
- All cores should be in the original boxes
- All cores must be matching units - identical part for part, no substitutions.
- All cores must be intact - no missing parts, disassembled, or damaged units accepted.
- AN RMA number is needed for all core returns, obtained through Bostech Customer Service.
- Please package all cores securely and tape outer box to avoid lost or damaged cores.
- Prop65 Warning:
- WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- CARB Certified:
- No
- Brand:
- Bostech
- Product Type:
- Remanufactured
- Material:
- Stainless Steel
- Heat Exchanger:
- Stainless Steel Tubing
- Gaskets Included:
- No
- Warranty:
- 24-Month Unlimited Mileage - see warranty section for details
- Origin:
- USA
CORE:
A core charge has been applied to this product. There are 2 options you can take:
Option 1: We can hold your order until the core (old unit) has been shipped to our facility, or
Option 2: We apply a core charge to the invoice and ship the product immediately.
If the core charge has been applied to your invoice, we will credit the core amount once we have received a valid undamaged core back from you. The core credit process generally takes 2 days once it arrives at our facility. Credit card processing time may delay 1-2 days. An RMA (return merchandise authorization) number is required for returns and can be obtained by contacting our Customer Service Team.
ÂWARRANTY:
Bostech / BT-Power's 24-Month Unlimited Mileage Warranty.
Our warranty covers product replacement for material and/or workmanship defects up to 24-months from the product purchase date, see our Warranty Policy under the Help Center link at the top of the page for full warranty details.
If you are experiencing issues with our products please contact our Customer Service Team.
Technical Support is available by contacting Bostech's Customer Service at 1-800-868-0057 or by emailing customerservice@bostechauto.com.
